ESD Cleaners and ESD Coatings

ACL Electronics Cleaner Degreaser PF

Product #8601 12oz (340g) aerosol can; 12 per case

Extra-Strength Universal Cleaner and Degreaser
Electronics Cleaner Degreaser PF is a fast-drying, one-step precision cleaning and degreasing agent safe for most plastics. Formulated with very low surface tension, this high-pressure aerosol cleaner flushes areas clean, is non-residual, and evaporates instantly.

This product is ideal for removing oils and hydraulic fluids from mechanical assemblies. It cleans handling soils from circuitry before reassembly. Excellent for removing grease from assembly lines and cleaning fiber optic connectors.

• Removes encrusted dirt, grease and other contaminants
• Safe to use on plastics
• Penetrates hard-to-reach areas
• Evaporates quickly; non-residual
• Very low odor
• Ozone safe: contains no CFCs, HCFCs, or 1,1,1 Trichloroethane
• Flammable

ACL Flux Remover No Clean EXTRA

Product #8607 12oz (340g) aerosol can; 12 per case
Highly effective for removing silicon-based substrates

ACL Flux Remover No Clean EXTRA is a powerful cleaner formulated with volatile methylsiloxane fluid for quick evaporation and removal of silicone-based substrates. This highly effective flux remover leaves surfaces residue-free making it ideal for cleaning through-hole, BGA, and SMT design circuit boards.

The low surface tension formula allows access into hard-to-reach areas and rapid removal all types of no clean flux and pastes, oxide particles, carbon, organic residues, adhesives, silicone-based conformal coatings, and greases.

• Flammable
• EXTRA strength cleaner removes silicon-based coatings
• Low odor
• Non-corrosive and safe for metals and components

ACL Flux Remover Lead-Free

For High-Temperature, Lead-Free Flux Removal
Product #8622 11oz (312g) aerosol can; 12 per case

Flux Remover Lead-Free is an extra-strength solvent that removes heavy and encrusted flux deposits resulting from high temperature lead-free soldering applications. This powerful cleaner quickly removes all types of flux, oxide particles, carbon, dust, grease, oil, and then evaporates quickly,leaving no residues.

The Flux Remever Lead-Free is suitable to use on printed circuit boards, motors, generators, metal housings, plugs,sockets, relays, contacts, switches, heat sinks, chip carriers, surface mount devices and pads.

• Quickly removes all rosin and no-clean flux types
• Removes encrusted, hard, baked-on fluxes and residues
• Removes oil, grease, ionic, and non-ionic residues
• Cleans and removes R, RA, RMA, and all synthetic flux residues
• Non-abrasive, non-corrosive
• Evaporates quickly and leaves no residue
• Ozone safe: contains no CFC’s or HCFC’s
• Flammable
• Low odor

ACL Flux Remover No Clean

Extra strength for removing no clean flux
Product #8623 12oz (340g) aerosol can; 12 per case

Flux Remover No Clean is an extra-strength solvent that removes heavy and encrusted flux deposits resulting from no clean soldering applications. This powerful cleaner penetrates quickly into hard to reach areas and will evaporate quickly leaving no residues. Use the brush applicator for the removal of heavy soils.

The Flux Remover No Clean is suitable to use on printed circuit boards, motors, generators, metal housings, plugs,sockets, relays, contacts, switches, heat sinks, chip carriers, surface mount devices and pads.

• Quickly removes all rosin and no-clean flux types
• Removes encrusted, hard, baked-on fluxes and residues
• Non-corrosive; safe to use on metal
• Evaporates quickly and leaves no residue
• Ozone safe: contains no CFC’s or HCFC’s
• Flammable
• Low odor

ACL A4 All Purpose Flux Remover and Cleaner

Environmentally Friendly Replacement
Product #8624 12oz (340g) aerosol can; 12 per case

A4 All Purpose Flux Remover and Cleaner is an extra strength solvent that has a powerful spray and strong solvent that blasts off residues and cleans areas under components that brushing cannot reach. It is specifically designed to replace chemical formulas using HCFC-141b and AK225. Designed to remove no clean and rosin fluxes without using ozone depleting chemicals.

This flux remover and cleaner is suitable to use on printed circuit boards, motors, generators, metal housings, plugs, sockets, relays, contacts, switches, heat sinks, chip carriers, surface mount devices and pads.

• Replaces HCFC 141b and AK225
• Quickly removes all rosin and no clean flux types
• Removes encrusted, hard, baked-on fluxes and residues
• Removes oil, grease, ionic, and non-ionic residues
• Cleans and removes R, RA, RMA, and all synthetic flux residues
• Non-abrasive, non-corrosive
• Evaporates quickly and leaves no residue
• Ozone safe: contains no CFC’s or HCFC’s
• Non-flammable

Staticide® IPA

Extra-Strength, Safe on Plastic
Product #8625 12oz (340g); 12 per case

ACL Staticide® IPA Aerosol is an essential work bench companion for the removal of solder pastes, inks, adhesives, and flux residues. Packaged in a convenient aerosol can, this is safe for plastics and metals and suitable for the cleansing of printed circuit boards, hardline coax cables,and for restoring automatic and semi-automatic printer stencils to a spotless state.

• Flammable
• 98.8% pure isopropyl alcohol
• Ideal for electronics cleaning & flux thinning
• Evaporates quickly, dries fast
• Leaves no residue
• Safe for plastics
• Made in the USA

IPA Cleaning Wipes

Presaturated general purpose wipes
Product #7600 100 wipes per canister; 6 canisters per case

ACL Staticide® IPA Cleaning Wipes are an essential work bench companion for the removal of solder pastes, inks, adhesives, and flux residues. Packaged in a convenient dispensing canister, these presaturated towel are safe for plastics and metals and suitable for the cleansing of printed circuit boards, hardline coax cables,and for restoring automatic and semi-automatic printer stencils to a spotless state.

ACL Lubricant Contact Renew

One-Step Contact Cleaner and Lubricant
Product #8606 12oz (340g) aerosol can; 12 per case

Lubricant Contact Renew is engineered to clean, lubricate, and protect connectors in one easy step. This non-flammable cleaner/lubricant will clean contact surfaces and provide a long-lasting protective film that guards the contact from corrosion.
ACL Lubricant Contact Renew cleans and protects metal contacts, potentiometers, relays, circuit breakers, fuse blocks, and electronic controls. It is ideal for protecting tin-lead, copper, and nickel contacts.

• Designed to minimize friction and metal wear in metal-to-metal contacts
• May be used on energized equipment
• Safe to use on plastics
• Penetrates deep to clean hard-to-reach places
• Protects metal contacts from carbon build-up and signal loss
• Cleans, lubricates, protects, and prevents metal friction in hard-to-reach areas
• Mild odor
• Ozone safe: contains no CFCs, HCFCs, or 1,1,1 Trichloroethane
• Non-corrosive, non-flammable

PL40 Premium Penetrating Lubricant

Aggressive Universal Degreaser and Lubricant
Product #8608 11oz (312g) aerosol can; 12 per case

This peak-performance degreaser-lubricant penetrates deeply to displace moisture and inhibit corrosion on electronic and electrical components. Not only is this dynamic universal system suitable for loosening frozen moving parts such as hinges, joints, and solenoids, it provides lasting protection against metal oxidation.

• Flammable
• High solids for superior lubrication
• Penetrates to remove moisture
• Loosens, cleans, and protects frozen and corroded parts

ACL Freeze Spray Anti-Stat

Safely Cools Individual Static-Sensitive Components
Product #8660 15oz (425g) aerosol can; 12 per case

Freeze Spray Anti-Stat is engineered for locating thermal intermittent electrical components or cooling printed circuit boards with minimal static generation. This circuit refrigerant system is non-flammable, residue-free and provides fast cooling action.

It is suitable to use for isolate thermal intermittent components, for dissipating heat while soldering/desoldering in rework/repair operations, for cooling down hot equipment and components for testing, to test circuit traces for continuity and cracks, and to test printed circuit boards for stress fractures and cracks.

• High heat transfer; acts as heat sink in repair operations
• Low temps -60°F
• Non-flammable
• Zero static generation
• Non-corrosive and non-abrasive
• Ultra-pure; filtered to 0.20 microns
• Fast-drying, non-residual
• Ozone safe: contains no CFC’s or HCFC’s

Mighty Mask

Peelable Solder Masking Agent
Product #8691 8oz (236g) squeeze bottle; 12 per case

ACL Mighty Mask is a fast curing, temporary masking agent designed for a variety of electronics manufacturing applications. It safeguards component-free areas on PCBs during soldering and on components during conformal coating processes.

A special heat-resistant compound is added to the latex to provide short-term, high-temperature protection up to 510F which makes it ideal for temperature-sensitive components in hand and wave soldering. In some environments, Mighty Mask’s swift cure time allows for usable, tack-free mask in 20 minutes.

This plastic-safe, peelable solder mask removes easily by hand or with tweezers without leaving contaminating or corrosive residues. It is compatible with all cleaning solvents and flux types.
Please be aware of extended lead times during winter.
ACL only ships solder mask on Mondays and Tuesdays during the winter months due to limited freeze cycles. In cases of extreme temperature and weather patterns, a shipping halt may occur.

• Compatible with rosin, lead-free, and water-soluble fluxes
• Dries fast, peels off easily
• Leaves no residue or contaminants
• Heat stable to: 510F (265C)
• Non-corrosive and safe for metals
• RoHS compliant
• Made in USA

ACL Acrylic Conformal Coating

For Insulation Against Electrical Shorts and Arcing
Product #8690 12oz (340g) aerosol can; 12 per case

The ACL Acrylic Conformal Coating is suitable in spray applications for protecting printed circuit boards, components and flex circuitry from damage. This coating provides excellent electrical insulation properties that withstand hot and cold operating environments, including heat generated by electronic circuitry.

The ACL Acrylic Conformal Coating offers a minimum dielectric strength of 1100 volts/mil. This tough, transparent coating will not fragment, chip, or crack, and provides exceptional insulation and protection. Formula is ready-to-use as there is no mixing required.

• Operating temperature from -75°F/-59°C to 270°F/132°C
• High dielectric breakdown of 8300 volts/mil
• Meets MIL-I-46058C, Type AR
• Compliant to IPC-CC-830B with amendment 1
• Designed to provide effective insulation against electrical shorts and harsh environments
• No ozone-depleting substances
• Provides excellent acid resistance
• Self-healing; easily repairable
• Contains UV tracer for easy quality control
• RoHS compliant

ACL Silicone Conformal Coating

Superior Protection Against Corrosion
Product #8695 11oz (312g) aerosol can; 12 per case

Silicone Conformal Coating is ideal for providing insulation against high-voltage arcing and corrosion. This highly effective insulative barrier is the ideal choice for protection against rust and corrosion in high humidity situations. Although not intended for outdoor use, Silicone Conformal Coating provides protection against the intermittent exposure of rain and salt on printed circuit board and electronic assemblies.

This tough, transparent coating will not fragment, chip, or crack, and provides exceptional acid resistance. Its maximum dielectric strength is 1100 volts/mil. This ready-to-use formula does not require mixing.

• Operating temperature from -55°F/-64°C to 390°F/199°C
• High dielectric breakdown of 1100 volts/mil
• Designed to provide effective insulation against electrical shorts and harsh environments
• No ozone-depleting substances
• Provides excellent acid resistance
• Self-healing; easily repairable
• Contains UV tracer for easy quality control
• RoHS compliant

ACL Turbo Blast

Duster with the Biggest Blast to Clean Anything Fast
Product #8640 11oz (296g) aerosol can; 12 per case

Turbo Blast Precision Duster is an economical, high-precision duster with a bigger blast for electronic cleaning applications. Its exceptional purity blast instantly cleans surfaces free of particulate contamination. Turbo Blast Precision Duster is engineered to remove dirt, dust, oxide particles, and other airborne particles instantly, and can be used to facilitate the accelerated drying of solvent cleaners in a variety of applications.

It is suitable to use on printed circuit boards, medical devices, microcomputers, lab equipment, connectors and contacts, photo equipment, printers, and audio/video equipment.

• Cleans hard-to-reach areas
• Non-flammable
• May be used on energized equipment
• Non-corrosive and non-abrasive; will not scratch surfaces
• Ultra-pure; filtered to 0.20 microns
• Non-residual
• Ozone safe: contains no CFC’s or HCFC’s

Precision Dust Remover II

• 100% Ozone Safe
• This multi-purpose air duster is ideal to use for blowing dust and dirt off of office equipment such as keyboards, printers, and copiers.
• Non-flammable
• Non-residual
• Ozone safe: contains no CFC’s or HCFC’s
• Product #8037 10oz (284g) aerosol can; 12 per case

ACL Plastic & Glass Cleaner

Foaming, Non-Streaking, Static-Neutralizing Cleaner
Product #8670 15oz (425g); 12 per case

ACL Anti-Static Plastic and Glass Cleaner effectively cleans, polishes, and neutralizes charges during use. A single application removes electrostatic buildup while also removing dirt, grease, ink, fingerprints and nicotine stains. Plastic and Glass Cleaner will not streak, smear, scratch, or abrade. Transparent surfaces are left spotless for improved optical clarity and distortion-free reading.

This foam cleaner is ideal to use on computer monitors and housings. It keeps observation windows on production equipment in pristine condition longer than other cleaners and does not contain CFC’s or HCFC’s.

• Controls static while cleaning and polishing
• Effectively removes handling oils, finger soils, and nicotine stains
• Prevents attraction of dust and dirt
• Compatible with plastics, glass, and stainless steel
• Foaming spray won’t run or drip; ideal for optical surfaces
• RoHS compliant

Staticide® Static Sentry

Provides Maximum Static Electricity Control
Product #2006 12oz (340g) aerosol can; 12 per case

Staticide® Static Sentry is ideal for eliminating charge generation on both porous and non-porous materials. Preventing the generation of static has a multitude of benefits including minimizing system errors, preventing dust attraction, and removing static charges on garments and upholstery.

Use Staticide® Static Sentry for static electricity control on a variety of surfaces including laminate flooring, carpeting, work surfaces, plastics, and glass. It is safe to use in manufacturing facilities for static control on carrying trays, protective packaging, and smocks.

• Instantly eliminates a static charge in under 2 seconds
• Exceeds MIL-B-81705 specifications for static decay in accordance with Federal Test Standard 101, method 4046
• Safe to use on plastic and fabrics
• Ozone safe
• Humidity independent
• RoHS compliant

Heavy Duty Staticide®

Eliminate Static on Carpets, Upholstery & Fabrics
Product #520 4-oz bottle; 12 per case (finger-pump sprayer)
Product #2005 1-quart bottle; 12 per case (trigger sprayer)
Product #2002 1-gallon bottle; 4 per case
Product #2002-5 5-gallon pail
Product #2002-2 50-gallon drum

Heavy Duty Staticide® is a static control product that is ideal for eliminating static and preventing tribogeneration on carpets, upholstery, and fabrics. It is also appropriate to use in avoiding jamming or material slippage during printing, packaging, and converting. This solution can even be used as an aid to avert dangerous static-triggering situations such as the ignition of combustible vapors, dust or solvents.
Staticide® topicals can be applied by spraying, wiping, dipping, transfer roller coating, gravure coating or flexographic printing.
Low odor.

• Every Staticide® topical dilution is proven to be effective in relative humidity below 15%.
• Exceeds MIL-B-81705 specifications for static decay in accordance with Federal Test Standard 101, method 4046.
• One gallon covers approximately 2000 sq.ft. and will last from weeks to months, depending on the application and the material it’s applied to.

General Purpose Staticide

Inhibits Static On All Surfaces
Product #530 4-oz bottle; 12 per case (finger-pump sprayer)
Product #2003 1-quart bottle; 12 per case (trigger sprayer)
Product #2001 1-gallon bottle; 4 per case
Product #2001-5 5-gallon pail
Product #2001-2 50-gallon drum

Using General Purpose Staticide® can prevent damage of sensitive electronic equipment, components, and sub-assemblies during manufacture, shipping or receiving by reducing a static charge to zero volts. This solution inhibits charge generation on all surfaces it’s applied to including tote boxes and carriers used to process and store electronic components. Using General Purpose Staticide® can also reduce dust, dirt, and bacteria attraction by removing the charge. Non-toxic and safe to use, this solution can be used in industrial, institutional, and commercial environments.

• Every Staticide® topical dilution is proven to be effective in relative humidity below 15%.
• Exceeds MIL-B-81705 specifications for static decay in accordance with Federal Test Standard 101, method 4046
• One gallon covers approximately 2000 sq.ft. and will last from weeks to months, depending on the application and the material it’s applied to.
• Staticide® topicals can be applied by spraying, wiping, dipping, transfer roller coating, gravure coating or flexographic printing.

Staticide® Clean Room

Control Static Electricity On All Surfaces
Product #5001 1-quart bottle; 12 per case (pour top)

Staticide® Clean Room is an economical anti-static cleaning formula that is sodium- and chloride-free. It eliminates static electricity on floors, chairs, work surfaces, glass, plastics and other static-prone materials.

• Exceeds MIL-B-81705 specifications for static decay in accordance with Federal Test Standard 101, method 4046
• Filtered to less than 0.5 microns
• Non-toxic and non-corrosive
• No powdering or outgassing
• Sodium- and chloride-free
• Suitable for class 100 and above industrial clean rooms
• Bottle is non-outgassing and anti-static; ready for sterilization

Staticide® Static Sentry

The Anti-stat That Really Works!
Product #2006 12oz (340g) aerosol can; 12 per case

Staticide® Static Sentry is ideal for eliminating charge generation on both porous and non-porous materials. Preventing the generation of static has a multitude of benefits including minimizing system errors, preventing dust attraction, and removing static charges on garments and upholstery.
Use Staticide® Static Sentry on a variety of surfaces including laminate flooring, carpeting, work surfaces, plastics, and glass. It is safe to use in manufacturing facilities for static control on carrying trays, protective packaging, and smocks.

• Instantly eliminates a static charge in under 2 seconds
• Exceeds MIL-B-81705 specifications for static decay in accordance with Federal Test Standard 101, method 4046
• Safe to use on plastic and fabrics
• Ozone safe
• Humidity independent
• RoHS compliant

Staticide® Original Concentrate

Eliminate Static Control Problems
Product #3000Q 1-quart bottle
Product #3000G 1-gallon bottle
Product #3000D 50-gallon drum

Staticide®, the original anti-static concentrate, is the key ingredient in many ACL anti-static solutions. Once diluted with water or isopropyl alcohol, it eliminates a host of static control problems – especially in the electronics, textiles and plastics industries. Staticide® Concentrate saves freight, handling and storage costs for high production facilities while offering greater flexibility in dilution.

Staticide® Original Concentrate can be mixed in the following concentrate to solvent ratios to obtain these Staticide® formulations:
Heavy Duty Staticide® – 1 to 39 (1 part concentrate to 39 parts solvent)
General Purpose Staticide® – 1 to 99 (1 part concentrate to 99 parts solvent)

• Exceeds MIL-B-81705 specifications for static decay in accordance with Federal Test Standard 101, method 4046
• Surface resistance 109 to 1010 ohms

Staticide® 20 Concentrate

Fragrance-Free, Lower Chlorides
Product #3020Q 1-quart bottle
Product #3020G 1-gallon bottle
Product #3020D 50-gallon drum

Staticide® 20 provides the same anti-static protection as the Staticide® Original Concentrate, but has no fragrance or perservatives. It has a mild alcohol odor and slightly fewer chlorides than the original.

• Flammable
• No floral mask
• For porous materials dilute 1 to 39 (1 part concentrate to 39 parts solvent)
• For non-porous materials dilute 1 to 99 (1 part concentrate to 99 parts solvent)
• Exceeds MIL-B-81705 specifications for static decay in accordance with Federal Test Standard 101, method 4046
• Decays static to zero volts in less than 2 seconds
• Surface resistance 109 to 1010 ohms

Staticide® 30 Concentrate

No Chlorides or Nitrates
Product #3030Q 1-quart bottle
Product #3030G 1-gallon bottle
Product #3030D 50-gallon drum

Staticide®30 Concentrate provides the same long-lasting static protection associated with the Staticide® name, but in a non-flammable formula with superior wetting properties.

The Staticide® 30 Concentrate is ideal for the manufacture of shielding bags because it contains no contaminants like chlorides or silicone. The formula does not include substances on the REACH SvHC list or in the

• RoHS Directive 2002/95/EC.
• Non-flammable
• No contaminants such as chlorides or silicone
• Exceeds MIL-B-81705 specifications for static decay in accordance with Federal Test Standard 101, method 4046
• Proven effective in relative humidity below 15%
• Surface resistance between 108 – 1010 ohms
• Dilute with water or isopropyl alcohol

Staticide® ESD Safety Shield

Advanced Dissipative Static Control
Product #6300S 4 oz bottle
Product #6300Q 1-quart bottle
Product #63001 1-gallon bottle
Product #63005 5-gallon pail

The Staticide® ESD Safety Shield coatings are made of a proprietary blend of conducting polymers which allows the coating to be inherently dissipative regardless of ambient relative humidity. Unlike surfactants, this Pedot formulation provides dependable protection by allowing static to dissipate safely without wearing off or losing resistivity.

Intended for indoor use, the Staticide® ESD Safety Shield is simple to use since it is a water-based one-part system. Whether applied by spraying, flow coat, dipping, or foam brush, the coating will be translucent without appearing “milky”.

Staticide® ESD Safety Shield’s low V.O.C. formulation will not outgas harmful or volatile components once dry. It is RoHS compliant and meets ANSI/ESD S20.20 for static dissipation.

Like our Staticide® topicals, in the right situation Staticide® ESD Safety Shield provides a cost-effective solution without sacrificing efficiency and quality. Suitable to use where static interferes with production assembly and ideal to use in static control environments to prevent ESD events. Use on electronic packaging, conveyor parts, and on objects in electronic assembly work areas.

Please be aware of extended lead times during winter. Due to the limited freeze cycles on this product, ACL only ships the ESD Safety Shield on Mondays and Tuesdays during the winter months. In cases of extreme temperatures and weather patterns, a shipping halt may occur.

• Surface resistivity of 106 to 109 ohms/sq.
• Water-based acrylic
• Translucent without appearing “milky”
• Adheres to a variety of plastics without chipping or peeling
• Meets ANSI/ESD S20.20 for static dissipation
• Can be applied via flow coat, dipping, foam brush, or spray
• Ambient cure

Staticide® ESD Safety Shield

Anti-Static Aerosol Formula
Product #6500 8 oz can

The 6500 formula, like the 6300, is designed for applications on common plastics such as acrylic, PET, PETG, PVC, and polycarbonate, but it is available in an economical aerosol container. A light spray application is sufficient for excellent electrical performance. Coating cures at ambient temperature. Intended for indoor use, this product is ideal for plastic parts, bins, and shelving. Our tests show electricals will last at least two years.

• Surface resistance of 10e6 to 10e9 ohms
• Water-based
• Humidity independent
• Translucent without appearing “milky”

Staticide® Acrylic

Affordable, High-Tech Static Protection
Product #40001 1-gallon container; 4 per case
Product #40005 5-gallon pail
Product #40002 54-gallon drum

Staticide® Acrylic Floor Finish offers high-tech static protection at a reasonable price. This economical formula leaves a durable, glossy finish that can last up to twelve months, making it a popular choice for budget-minded companies with industrial areas where static control is essential. Perfect anti-static floor finish for production areas, warehousing, shipping, laboratories and electronic repair facilities.

Please be aware of extended lead times during winter. Due to the limited freeze cycles on this product, ACL only ships floor finishes and paint on Mondays and Tuesdays during the winter months. In cases of extreme temperatures and weather patterns, a shipping halt may occur.

• Coverage is approximately 1500 – 2000 sq. ft. per gallon
• V.O.C. is less than 4%
• Solids are 20%± 5%
• UL listed for slip resistance
• Compliant to ANSI/ESD S20.20
• Surface resistance (RTT): 108 – 109 ohms @ 100v at 12 RH
• Strip cycle is 6 – 12 months
• Use on vinyl, linoleum, or ceramic tile

Staticide® Ultra

Ideal Choice for Clean Room Facilities
Product #4600-1 1-gallon container; 4 per case
Product #4600-5 5-gallon pail
Product #4600-2 54-gallon drum

No other ESD floor finish can match Staticide® Ultra Floor Finish for electrical properties, physical longevity, and gloss. This urethane-enhanced formula features superior abrasion resistance and durability, fortifying floors with a long-lasting protective layer that is shiny and ESD-safe for 12 to 24 months.

Ideal choice for any static control environment, such as electronic, medical, clean room manufacturing facilities and sensitive device manufacturing.
Please be aware of extended lead times during winter. Due to the limited freeze cycles on this product, ACL only ships floor finishes and paint on Mondays and Tuesdays during the winter months. In cases of extreme temperatures and weather patterns, a shipping halt may occur.

• Coverage is approximately 1500 – 2000 sq. ft. per gallon
• V.O.C. is less than 4%
• Solids are 20%± 5%
• UL listed for slip resistance
• Compliant to ANSI/ESD S20.20
• Surface resistance (RTT): 107 – 109 ohms @ 100v at 12 RH
• Strip cycle is 12 – 24 months
• Use on vinyl, linoleum, or ceramic tile

Staticide® Ultra II

Ideal for Any Static Control Environment
Product #4800-1 1-gallon container; 4 per case
Product #4800-5 5-gallon pail
Product #4800-2 54-gallon drum

Whether revitalizing old ESD tiles or protecting a new epoxy floor, ACL’s Staticide® Ultra II Floor Finish will help safeguard your costly investment of specialized flooring. This distinctive anti-static blend is compatible with problematic plasticizers found in conductive and dissipative tiles and epoxy. Staticide® Ultra II is also the ultimate choice for adding gloss and static protection to concrete.

Ideal choice for any static control environment, such as electronic, medical, clean room manufacturing facilities and sensitive device manufacturing.
Please be aware of extended lead times during winter. Due to the limited freeze cycles on this product, ACL only ships floor finishes and paint on Mondays and Tuesdays during the winter months. In cases of extreme temperatures and weather patterns, a shipping halt may occur.

• Coverage is approximately 1500 – 2000 sq. ft. per gallon
• V.O.C. is less than 4%
• Solids are 21%± 5%
• UL listed for slip resistance
• Compliant to ANSI/ESD S20.20
• Surface resistance (RTT): 107 – 109 ohms @ 100v at 12 RH
• Strip cycle is 12 – 18 months
• Use on concrete, epoxy, ESD epoxy and dissipative tile

Staticide® Anti-Static Floor Stripper

Biodegradable, Low-Foaming Formula
Product #4010-1 1-gallon container; 4 per case
Product #4010-5 5-gallon pail
Product #4010-2 54-gallon drum

Staticide® Anti-Static Floor Stripper provides a completely clean and finish-ready surface by emulsifying dirt and residual particles of old wax and acrylic floor finishes. Effective in hard or soft water, this biodegradable, low-foaming formula removes multiple coats of synthetic floor finishes and embedded dirt without damaging or dulling floors. When used at proper dilutions, stripper is balanced so that neutral cleaning is not necessary.

• No ammonia or phosphates
• Low V.O.C.
• Zero tribogeneration
• Biodegradable
• Covers approximately 5000 sq. ft. per gallon
• Dilute 1:4 (stripper to water)

Staticide® Restorer Cleaner

Anti-Static Floor Cleaner
Product #4100-1 1-gallon container; 4 per case
Product #4100-5 5-gallon pail
Product #4100-2 54-gallon drum

The Restorer Cleaner renews static decay properties, surface resistivity and the durability of ACL floor finishes. Special conductive additives clean while simultaneously breaking down electrical discharge and returning floor finishes to safe specifications. No harmful chemicals like ammonia, phosphates, alkali, nonylphenol (NP), or nonylphenol ethoxylate (NPE) are used in the formulation. This special detergent can be applied with a mop or in a standard burnishing machine for easy application.

• Removes black heel marks
• Lengthens maintenance cycle
• Revitalizes gloss
• Dilution ratio 1:10 (1 part cleaner to 10 parts water)
• Covers approximately 1000 – 1500 square feet per diluted gallon

Staticide® Diamond ESD Paint

Cost-Effective Static Control
Product #4700SS-1 1-gallon container
Product #4700SS-5 5-gallon pail

Carbon-loaded water-based polyurethane coating for concrete dissipates static discharge for cost-effective static control. Designed for interior concrete floors and unfinished surfaces, this ESD paint is perfectly suited for temporary ESD work spaces, data centers, warehouses, and creating Faraday cages.
Please be aware of extended lead times during winter. Due to the limited freeze cycles on this product, ACL only ships floor finishes and paint on Mondays and Tuesdays during the winter months. In cases of extreme temperatures and weather patterns, a shipping halt may occur.

• Designed for concrete floors
• Available in dark gray only
• Coverage approximately 250 sq. ft. per gallon
• ANSI/ESD S20.20 and RoHS compliant
• Surface resistivity is below 109 ohms per square
• Withstands alcohol, oil, gasoline and most common electronic chemicals
• US customers can call 1-800-782-8420 for a sample

ACL 10R Primer

Non-Toxic and Long-Lasting
Product #ACL10R-1 1-gallon container
Product #ACL10R-5 5-gallon pail
Product #ACL10R-2 54-gallon drum

ACL 10R primer is a clear, penetrating, ready-to-use, non-toxic primer that provides long-lasting protection against damage associated with water penetration for a variety of horizontal and vertical surfaces, especially non-sealed concrete. When necessary, use in the preparation of 4700SS Staticide® Diamond Paint.

Please be aware of extended lead times during winter. Due to the limited freeze cycles on this product, ACL only ships floor finishes and paint on Mondays and Tuesdays during the winter months. In cases of extreme temperatures and weather patterns, a shipping halt may occur.

• Outstanding water repellency
• Environmentally safe and 100% vapor permeable

Neutral Cleaner Concentrate

Anti-Static, Neutral and Non-Abrasive
Product #4020-1 1-gallon container; 4 per case
Product #4020-5 5-gallon pail
Product #4020-2 54-gallon drum

ACL anti-static neutral cleaners provide constant detergency and can be used in all facilities, as they leave no film or streaks and are safe for septic and sewage systems. Anti-static properties of production environments will not be degraded with these non-abrasive cleaners. Containing no phosphates or alkalis, ACL neutral cleaners are perfect products for cleaning ESD paint.

4020 Neutral Cleaner Concentrate will yield a high volume of cleaner allowing facilities to save on storage space and the cost of pre-mixed material. Convenient when used with auto scrubbers in large facilities.

• Dilute 1:128 cleaner to water
• Covers approximately 10,000 sq. ft. per gallon
• Use on concrete, painted floors, ESD tile, and ESD epoxy

Neutral Cleaner Ready-to-Use

Product #4030-1 1-gallon container; 4 per case
Product #4030-5 5-gallon pail
Product #4030-2 54-gallon drum

Maintaining small spaces is easy and convenient with the ready-to-use 4030 Neutral Cleaner. No need to dilute, the 4030 formula is blended specifically for ESD tiles, ESD epoxy, and ESD paint. The low detergency of the cleaner will allow for streakless cleaning. Safe for production environments and sewage systems.

• Covers approximately 75 sq. ft. per gallon
• Use on concrete, painted floors, ESD tile, ESD epoxy and rubber & vinyl runners

Mat & Table Top Cleaner

Effective Cleaning With No Alkali or Ammonia
Product #6001 1-quart bottle; 12 per case (trigger sprayer)
Product #6002 1-gallon container; 4 per case

ACL Mat & Table Top Cleaner is a multi-purpose neutral cleaner that is designed for production areas including static control stations. It is the ideal cleaner for areas in which static-sensitive devices are assembled, tested, and handled, but can also be used in areas that require a mild but effective cleaner. This non-abrasive formula is safe to use on workstations, table tops and anti-static mats, including rubber and vinyl.

Mat & Table Top Cleaner is a non-flammable cleaner that leaves no film or streaks. It effectively removes flux residues, oily finger-marks, grease, nicotine, dirt, grime and inorganic contaminants. It also removes dirt on chair mats and other antistatic mats without degrading the surface’s antistatic properties.

• Maintains the original resistivity of anti-static mats
• Cleans, rejuvenates, and extends the life of ESD mats
• Meets or exceeds Mil 81705 & NFPA 56A with an electrostatic decay
• time of .1 second according to Federal Test Method 4046
• No alkali or ammonia

Staticide® Hi Tech Hand Lotion

Static Dissipative Moisturizing Lotion
Product #7001S 1 oz squeeze tube; 24 per case
Product #7001 8 oz squeeze tube; 24 per case
Product #7016 16 oz bottle (pump top); 12 per case
Product #7002 1-gallon container (pump top); 4 per case

Moisture on skin is vital to wrist strap performance for personal grounding. ACL Staticide® Hi Tech Hand Lotion’s static dissipative formula moisturizes the skin for better bonding between the skin and wrist strap which is imperative in the electronics manufacturing industry.

Enriched with natural moisturizers, including aloe vera and vitamin E, Staticide® Hi Tech Hand Lotion will absorb quickly into the skin and encourage good skin health. Daily use of this hand lotion relieves and prevents dryness, flaking and irritation caused by the constant use of gloves and chemicals.

This non-acidic, greaseless formula contains no glycerin, silicone, lanolin or mineral oil. It absorbs quickly into the skin, providing good contact between the skin and wrist strap, and will not contaminate work surfaces, leaving your work area ESD safe.

• Static dissipative
• No glycerin, silicone, lanolin or mineral oil
• Improve wrist strap performance
• Fragrance-free

Staticide® Latex ESD Finger Cots

Economical Static Shielding
Product #70LA-S Small (pink); 720 per pack
Product #70LA-M Medium (pink); 720 per pack
Product #70LA-L Large (pink); 720 per pack
Product #70LA-XL Extra Large (pink); 720 per pack
Product #80LA-S Small (black); 720 per pack
Product #80LA-M Medium (black); 720 per pack
Product #80LA-L Large (black); 720 per pack
Product #80LA-XL Extra Large (black); 720 per pack

For economical static protection, ACL’s Staticide Latex ESD Finger Cots protect boards from ESD and contaminants such as skin salts, oils, and particulates. While anti-static pink latex is commonly recognized for being effective for static control, black latex offers added security for those specifying mid-range static dissipation. Washed and powder-free, the inherent elasticity of latex allows for a comfortable fit that is easy wear.

• Powder-free / ISO 5 / Class 100 Cleanroom
• Suggested for Class II static sensitivity devices
• Compliant with ASTM and IEST-RP-CC 005.3 standards
• Immobilized packaged in anti-static, gas-impermeable film flushed with semiconductor grade N2
• 70LA (pink) 1010 ohms resistance as per ANSI-ESD SP15.1
• 80LA (black) 107 ohms resistance as per ANSI-ESD SP15.1

Staticide® Nitrile ESD Finger Cots

Latex-free ESD Shielding
Product #90NI-S Small (white); 720 per pack
Product #90NI-M Medium (white); 720 per pack
Product #90NI-L Large (white); 720 per pack
Product #90NI-XL Extra Large (white); 720 per pack
Product #100NI-S Small (blue); 720 per pack
Product #100NI-M Medium (blue); 720 per pack
Product #100NI-L Large (blue); 720 per pack
Product #100NI-XL Extra Large (blue); 720 per pack

ACL’s Nitrile ESD Finger Cots take the worry away for those with latex allergy issues while offering protection against skin and oil contamination. Since nitrile is resistant to many chemicals, it will not dissolve under chemical contact.

The inherently anti-static nature of nitrile also offers natural static control without carbon shedding. For EPAs where cleanliness is a concern, blue does not expose as much handling soils. For companies using both non-ESD and ESD finger cots, ACL offers white finger cots to differentiate ESD protection.

• Powder-free / ISO 5 / Class 100 Cleanroom
• Suggested for Class II static sensitivity devices
• Compliant with ASTM and IEST-RP-CC 005.3 standards
• Immobilized packaged in anti-static, gas-impermeable film flushed with semiconductor grade N2
• 109 ohms resistance as per ANSI-ESD SP15.1
• 3 mil thickness

Staticide® Wipes

Product #SW12 24 wipes per box; 12 boxes per case
Product #2450 450 wipes

One-Step Cleaning and Static Control Solution
Staticide® wipes are the ideal anti-static applicator for keeping electronics and equipment clean and static-free. Staticide® wipes have the same long-lasting static protection as our Staticide® topical liquids, but offer a one-step cleaning and static control solution.

Staticide® is safe to use around electronics and since Staticide® will prevent dust buildup and dust attraction, computer and laptop screens will keep clean longer just by wiping the plastic housing (avoid wiping directly on screen). Staticide® wipes can also be used on industrial machinery and parts, and they are great to use in tight spaces.
Will meet MIL-B-81705 for static decay even in dry conditions and low humidity

• Available in bulk packaging for less waste
• Individually wrapped in a foil pouch for long life
• Size: 5″ x 8″

Heavy Duty Low Lint Wipes

Product #LF50 White 12″x13″ wipes; 50 per bag; 12 bags per case
Product #LF50B Blue 12″x13″ wipes; 50 per bag; 12 bags per case

Like our LL Low-Lint wipes, the ACL Staticide® Heavy Duty Low-Lint Wipes provide an economical value for industrial all-purpose cleaning, but provide slightly more absorbancy. The extra weight add softness, strength, and assurance that these low-particle wipes retain its material integrity when absorbing liquid.

This non-woven hydroentangled material uses no binders or additives and exhibits lower particle and fiber release than other comparable products. Merging together the durability of polyester and the sorbency of cellulose, the ACL Staticide® Heavy Duty Low-Lint Wipes resist breaking down when absorbing chemical solvents like isopropyl alcohol making this universal polycell cleaning wipe an essential staple.

• 12″ x 13″, 1/4 fold
• Hydroentangled 55% Cellulose/45% Polyester nonwoven wipe
• Excellent choice for general industrial manufacturing use; clean & economical
• Maintains strength in wet applications
• Compatible with ISO Class 6+ (Class 1000) cleanroom environments
• Available in white and blue

Low-Lint Wipes

Product #8067 4″ x 4″; 20 wipes per bag; 24 bags per case
Product #8044 6″ x 6″; 75 wipes per bag; 12 bags per case
Product #8099 9″ x 9″; 100 wipes per bag; 6 bags per case
Product #LF99B 9″ x 9″; 300 wipes per bag; 6 bags per case

The ACL Staticide® Low Lint Wipes offer high value for all-purpose industrial cleaning. These low-particle wipes are soft and strong and capable of holding liquid without breaking down.
The hydroentangled spunlace blend of cellulose and polyester fibers uses no binders and exhibits lower particle and fiber release than other comparable non-woven products.

With combining the durability of polyester and the sorbency of cellulose, the LL Staticide Low Lint wipes allow chemical solvents like isopropyl alcohol to be absorbed without damaging the fabric. The cleanliness and robustness of the material make this all-purpose cleaning wipe an essential staple.

• Spunlace hydroentangled nonwoven material
• 45% polyester and 55% cellulose
• Low particle and fiber generation
• Suitable for ISO Class 6 (Class 1000) environments

Staticide® Microfiber Cloth

Great for Eyeglass Lenses, Computer Screens, Microscopes
Product #MFC1 9″x9″ blue wipes; 72 per case
Product #MFC24 9″x9″ blue wipes; 24 per case

In one motion, this cloth can eliminate the need for harmful cleaners and disposable wipes. This material naturally attracts dust and can withstand multiple machine washings. The sturdy construction of the MFC Staticide® Microfiber Cloth is soft enough to avoid scratching on eyeglass lenses and glass surfaces. The material lifts dirt and dust without the use of chemicals and gets softer with washing.

• Suitable to use on optical lenses, laboratory instruments, microscopes, cell phones, computer screens, and compact disks.
• 9″ x 9″
• Reusable; machine washable
• Soft; will not scratch
• No lint