BVX-201-KIT

The BVX-201-KIT is a two operator, PRE-HEPA-GAS volume extraction system with two BVX-ARML designed to be used adjacent to the workbenches.

Features and Benefits

• Two station design for dynamic fume extraction
• New brushless motor, quiet operation
• Complete portability, placed under or next to the bench-top
• Fitted with 2x 50mm (2″) ∅ arms or 1x 63mm (2.5″) ∅ arm
• Main filter has a HEPA efficiency of 99.97% at 0.3 micron, and an activated carbon filter to remove additional gases
• Audible alarm informs operators when filters need replacing
• Easy access on/off remote switch

Product comprises of

• BVX-201 Unit
• Set of Pre-HEPA
• Gas filters
• Remote power switch
• Set of 2 BVX-ARM-K1 (BVX-ARM 760mm (30″) long with 1.8m (6′) long hose and table bracket with C-clamps)

BVX-201-KIT1

The BVX-201-KIT is a two operator, PRE-HEPA-GAS volume extraction system with two BVX-ARM-K1 designed to be used adjacent to the workbenches.

Features and Benefits

• Two station design for dynamic fume extraction
• New brushless motor, quiet operation
• Complete portability, placed under or next to the bench-top
• Fitted with 2x 50mm (2″) ∅ arms or 1x 63mm (2.5″) ∅ arm
• Main filter has a HEPA efficiency of 99.97% at 0.3 micron, and an activated carbon filter to remove additional gases
• Audible alarm informs operators when filters need replacing
  Easy access on/off remote switch

Product comprises of

• BVX-201 Unit
• Set of Pre-HEPA
• Gas filters
• Remote power switch
• Set of 2 BVX-ARML flexible ESD safe arm
• 760mm (30″) long with arm clip

BVX-103

The BVX-103 is a single user, PRE-GAS volume extraction system designed to be used directly on the workbench. The unit is designed with an innovative adaptor which allows the user to choose between plenum or arm extraction options.

Features and Benefits

• Portable, single user fume extraction system
• Low noise unit
• No external ducting or compressor needed
• Unit easily fits on any bench-top or under-bench
• 12” wide (300mm) plenum
• Innovative adaptor transforms the plenum into an arm
• Powerful 85m3/hr-airflow rate
• Immediate extraction of fumes, particles and vapors
• Two filtration configurations: heavy soldering and light dust or light duty organic solvent and adhesive applications
• Bi-coloured LED light indicates when the filters are blocked and require replacing

Product comprises of

• Unit
• Set of filters
• BVX-ADT arm to plenum adaptor
• BVX Arm (760mm, 29.50″)

VFX-1000

Solder smoke is more than just an irritant. It can reduce worker productivity through a loss of concentration and fatigue.  These and other health concerns may be a result of exposure to solder fumes during the production process. As an employer, you are responsible for properly managing the health risks associated with solder fumes, and take appropriate precautionary measures.  Solder fume extraction is a simple way to manage the risks to employees and your organization.

The VFX–1000 Fume Extraction unit is Metcal’s next-generation under-the-bench fume extraction unit. Its improved pre-filter provides higher efficiency, and its enhanced gas filter that is a 50/50 mix of Activated Aluminum Potassium Permanganate and Active Carbon allows for a wider range of fume extraction.

Features

• Digital Speed Control
• Deep Pleat Pre-Filter
• Blower with high airflow and pressure
• 3 stage filtration
• Built-in silencing
• Long life filters with low replacement costs
• Remote speed control
• Remote Start/Stop Interface
• Filter change/System Fail Signal
• Universal Voltage

BTX-208

The BTX-208 Fume Extraction System is a tip extraction unit with a high vacuum blower motor and a capacity for up to eight workstations.

Features and Benefits

• High performance extraction directly from the tip of any iron
• Easy extraction network configuration for up to 8 benches
• Complete portability. Designed for under-bench installation
• Main filter has a HEPA efficiency of 99.97% at 0.3 micron, and an activated carbon filter to remove gases
• Both pre- and main- filters can be changed independently
• Plug-and-play ducting system for simple, flexible low cost solution and fast installations
• Universal hose connection kit – universal power supply that accepts 100 to 240V at 50 or 60H

Product comprises of

• BTX-208 Unit
• Set of filters (Pre and main)
• Bleed cover
• Threaded 32mil connector

Customized Fume Extraction Systems

Suitable for use in working environments requiring the filtration of particles such as solder smoke. The filter can also be fitted with activated carbon for the filtration of everyday odors and certain chemical fumes. The efficient EC motor with integrated speed control allows for variable airflow. The fan’s optimized design provides superior performance with maximum pressure. Connects easily to single-phase electrical connectors. Can also be used as a separate unit in combination with wall-bracket and laboratory arms. A portable filter with a fan that produces a low noise level and allows for variable airflow. The filter is either a Particle/ Gas filter or solely a Gas filter and can be easily adapted according to your needs. A two-stage filter that separates dust and fume particles with the initial HEPA section. This is followed by a Activated Carbon filter for absorption of VOCs, gases and odors